The DGS-1510 Series is D-Link’s latest generation of stackable Gigabit switches with 10G port connectivity, suitable for business networks of all sizes. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Available in 16, 24 and 48 10/100/1000 Mbps port models, these switches also include four optical ports – including two or four 10G SFP+ ports.
Power over Ethernet (DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP only)
All 10/100/1000 Mbps ports on the DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP are PoE-enabled, for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with IEEE 802.3af and IEEE 802.3at, these models support up to 30W of power output on any particular PoE port. The total PoE power budgets are 193W for the DGS-1510-28P, and 370W for the DGS-1510-28XMP and DGS-1510-52XMP. Additionally, the power budget for the DGS-1510-52XMP can be increased to 740W when utilized with the DPS-700 redundant power supply, allowing the switch to power even more devices.
Time-based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours. A unique “PD-alive” feature, ideal for surveillance networks, pings attached PDs (IP Cameras, wireless access points) and resets the PoE power when inactivity is detected.
10G SFP+ Stacking/Uplink Ports
The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Copper (DAC) cables or any compatible SFP+ transceiver1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Network administrators can also easily configure and manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks and servers while still maintaining fast data transfer rates.
Layer 3 Traffic Management
The DGS-1510 Series provides static routing, allowing network segmentation into workgroups that communicate between VLANs and increase application performance. With these capabilities, network administrators can reduce the load on core devices, creating a scalable and efficient network.
Extensive Layer 2 Features
The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection automatically detects and shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can determine cable quality and can quickly discover sections of cabling that need to be replaced.
Traffic Classification and Quality of Service
The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart switches. This technology consolidates data and surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware and infrastructure. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.
Keep Your Network Secure
D-Link’s innovative Safeguard Engine helps to protect the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC and web-based access control. This gives network administrators multiple authentication options, reducing deployment times and removing the need for client software. The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users’ traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.
IPv6 Ready
The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 security features, and IPv6 Quality of Service (QoS), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv4/v6 dual stack functionality, which allows the switches to act as a bridge between IPv4 and IPv6 networks.
Versatile Management
The DGS-1510 Series supports a variety of management options. A webbased Graphical User Interface (GUI) enables administrators to easily set up and remotely manage their networks, greatly reducing switch deployment time. Two modes of GUI are supported – Standard Mode and Surveillance Mode. Surveillance Mode detects compatible ONVIF cameras and places them in a surveillance VLAN, allowing a single switch to be used for voice, video, and data, removing the need for dedicated hardware and reducing maintenance costs.
The DGS-1510 Series also comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The DNA utility furthermore allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment and display them onscreen for instant access. This allows for simultaneous configuration and basic setup of all discovered devices, including password changes and firmware upgrades.
The DGS-1510 Series also features an extensive Command Line Interface (CLI) and SNMP support, allowing centralized management of a large number of devices. Out-of-band management of the switches is also available via a designated console port. This provides access to devices in the event that there is a loss of connectivity or that the switch is overloaded with bulk or malicious traffic.
Energy Efficient
All of the DGS-1510 Series switches are capable of conserving power without sacrificing operational performance or functionality thanks to D-Link Green 3.0 technology. Using the IEEE 802.3az Energy Efficient Ethernet (EEE) standard, the switches will automatically decrease power usage when traffic is low. For environments that do not fully support this standard, these switches offer advanced power-saving settings including port shut-off, LED shut-off, and system hibernation based on custom profiles. These profiles can also be applied to the PoE switches so that there is no unnecessary power consumption during off-hours.
General | |
Port Standards & Functions |
IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet 802.3ae 10 GbE IEEE 802.3x Flow Control for Full-Duplex Mode Auto-negotiation |
Number of Ports |
DGS-1510-20 - 16 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+ DGS-1510-28 - 24 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+ DGS-1510-28X - 24 10/100/1000 Mbps, 4 10G SFP+ DGS-1510-28P - 24 10/100/1000 Mbps PoE capable, 2 Gigabit SFP, 2 10G SFP+ DGS-1510-28XMP - 24 10/100/1000 Mbps PoE capable, 4 10G SFP+ DGS-1510-52 - 48 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+ DGS-1510-52X - 48 10/100/1000 Mbps, 2 Gigabit SFP, 4 10G SFP+ |
Network Cables |
UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.) |
Full/Half Duplex | Full/half duplex for 10/100 Mbps and Gigabit speed |
Media Interface Exchange | Auto or configurable MDI/MDIX |
Performance | |
Switching Capacity |
DGS-1510-20 - 76 Gbps DGS-1510-28 - 92 Gbps DGS-1510-28X - 128 Gbps DGS-1510-28P - 92 Gbps DGS-1510-28XMP - 128 Gbps DGS-1510-52 - 140 Gbps DGS-1510-52X - 176 Gbps |
Transmission Method | Store-and-forward |
MAC Address Table | 16,000 entries per device |
MAC Address Update |
Up to 512 static MAC entries Enable/disable auto-learning of MAC addresses |
Maximum 64 bytes Packet Forwarding Rate |
DGS-1510-20 - 56.54 Mpps DGS-1510-28 - 68.45 Mpps DGS-1510-28X - 95.24 Mpps DGS-1510-28P - 68.45 Mpps DGS-1510-28XMP - 95.24 Mpps DGS-1510-52 - 104.16 Mpps DGS-1510-52X - 130.95 Mpps |
Packet Buffer Memory |
DGS-1510-20/28/28X/28P/28XMP - 1.5 MB per device DGS-1510-52/52X - 3 MB per device |
PoE (DGS-1510-28P and DGS-1510-28XMP only) | |
PoE Standard | IEEE 802.3af, 802.3at |
PoE Capable Ports | Ports 1 to 24: Up to 30 W |
PoE Power Budget |
DGS-1510-28P - Max. 193 W DGS-1510-28XMP - Max. 370 W |
Physical & Environment | |
AC Input | 100 to 240 VAC 50/60 Hz internal universal power supply |
Maximum Power Consumption |
DGS-1510-20 - 20.3 W DGS-1510-28 - 24 W DGS-1510-28X - 22.3 W DGS-1510-28P – 238.7 W (PoE on), 29 W (PoE off) DGS-1510-28XMP - 436.3 W (PoE on), 38.4 W (PoE off) DGS-1510-52 - 38.4 W DGS-1510-52X - 44.2 W |
Standby Power Consumption |
DGS-1510-20 - 12.2 W DGS-1510-28 - 15.2 W DGS-1510-28X - 15.2 W DGS-1510-28P -21 W DGS-1510-28XMP - 28.3 W DGS-1510-52 - 27.6 W DGS-1510-52X - 28.9 W |
Smart Fan Quantity |
DGS-1510-20/28/28X – 1 DGS-1510-28P/28XMP/52/52X – 2 |
Acoustics |
DGS-1510-20 - 43.8 dB(A) DGS-1510-28 - 43.8 dB(A) DGS-1510-28X - 42.7 dB(A) DGS-1510-28P – 46.4 dB(A) DGS-1510-28XMP - 56.9 dB(A) DGS-1510-52 - 44.2 dB(A) DGS-1510-52X - 45.8 dB(A) |
Heat Dissipation |
DGS-1510-20 - 41.602 BTU/hr DGS-1510-28 - 72.292 BTU/hr DGS-1510-28X - 76.043BTU/hr DGS-1510-28P – 813.967 BTU/hr DGS-1510-28XMP - 1487.78 BTU/hr DGS-1510-52 - 130.944 BTU/hr DGS-1510-52X - 138.787 BTU/hr |
Operation Temperature | -5 to 50 ˚C (23 to 122 ˚F) |
Storage Temperature | -20 to 70˚C (-4 to 158 ˚F) |
Operation Humidity | 0% to 95% non-condensing |
Storage Humidity | 0% to 95% non-condensing |
Dimensions |
DGS-1510-20 - 280 x 180 x 44 mm (11 x 7.09 x 1.73 inches) DGS-1510-28 - 440 x 210 x 44 mm (17.36 x 8.26 x 1.73 inches) DGS-1510-28X - 440 x 210 x 44 mm (17.36 x 8.26 x 1.73 inches) DGS-1510-28P - 440 x 250 x 44 mm (17.36 x 9.84 x 1.73 inches) DGS-1510-28XMP - 440 x 308 x 44 mm (17.36 x 12.12 x 1.73 inches) DGS-1510-52 - 440 x 250 x 44 mm (17.36 x 9.84 x 1.73 inches) DGS-1510-52X - 440 x 250 x 44 mm (17.36 x 9.84 x 1.73 inches) |
Weight |
DGS-1510-20 - 1.24 kg DGS-1510-28 - 2.00 kg DGS-1510-28X - 2.00 kg DGS-1510-28P – 2.54 kg DGS-1510-28XMP - 4.25 kg DGS-1510-52 - 2.40 kg DGS-1510-52X - 2.40 kg |
Diagnostic LEDs |
Power/Stacking ID/Fan (per device) Power/Stacking ID/Fan Error/PoE Push Button (per device) (for DGS-1210-28P only) Link/Activity/Speed (per 10/100/1000 Mbps port) Link/Activity/Speed/PoE Mode (per 10/100/1000 Mbps port) (for DGS-1210-28P only) Link/Activity/Speed (per Gigabit SFP port) Link/Activity/Speed (per 10G SFP+ port) |
Certifications |
CE FCC C-Tick VCCI BSMI CCC |
Safety |
cUL CB |
Software Features | |
Stackability |
Virtual Stacking Support
D-Link Single IP Management
Supports Duplex Chain/Ring topology |
L2 Features |
MAC Address Table: Up to 16,384 Flow Control
802.3x Flow Control IGMP Snooping
IGMP v1/v2 Snooping
Supports MLD v1/v2 awareness
802.1D STP 802.3ad Link Aggregation Max. 32 groups per device/8 ports per group Port Mirroring
Support 4 mirroring groups
Forwards all unregistered groups |
VLAN |
802.1Q Tagged VLAN 4K VLAN Groups Configurable VID: 0~4094 GVRP Asymmetric VLAN Auto Voice VLAN Auto Surveillance VLAN 2.02 MAC-based VLAN Protocol-based VLAN |
Quality of Service (QoS) |
CoS based on
802.1p priority Queue Handling
Strict Priority Queue (SPQ) Bandwidth Control Port-based (Ingress/Egress, min. granularity for 10/100/1000 BASE-T ports is 64 Kb/s) |
L3Features |
ARP
256 Static ARP 16 IP interfaces Default Routing Static Routing
64 IPv4 Static Route Entries |
Access Control List (ACL) |
ACL based on
802.1p priority
Permit Max. 768 rules Single or multiple ports (each rule) Time-based ACL ACL Statistics |
Security |
Port Security
Supports up to 128 MAC addresses per port Broadcast/Multicast/Unicast Storm ControlDynamic ARP Inspection D-Link Safeguard Engine DHCP Server Screening ARP Spoofing Prevention Max. 64 entries SSH
Supports v2 DoS Attack Prevention SSL
Supports v1/v2/v3 IP-MAC-Port Binding
DHCP snooping |
AAA |
Compound Authentication 802.1X Port and MAC-based Authentication
Supports RADIUS and Local Server
Port-based Access Control RADIUS and TACACS+ authentication for switch access RADIUS and TACACS+ accounting MAC-based Access Control (MAC)
Port-based Access Control
Port-based Access Control |
OAM |
Cable Diagnostics sFlow Factory Reset |
Management |
Command Line Interface (CLI) Telnet Server TFTP Client IPv6 Neighbor Discovery Configurable MDI/MDIX SNMP Supports v1, v2c, v3 SNMP TrapSystem Log Max. 10,000 log entries Debug commandDual images Surveillance mode2 DHCP Client D-Link Network Assistant support SNTP ICMPv6 IPv4/v6 Dual Stack DHCP Auto Configuration RMON v1 LLDP, LLDP-MED DHCP relay Web-based GUI TFTP Client NTP Telnet client (supports CLI only) |
D-Link Green 3.0 Technology |
Power Saving by:
Link Status Time-based PoE (PoE models only) |