+964 750 905 1010
info [at] helptechco [dot] com
in stock

  • 300Mbps(2.4GHz)+300Mbps(5GHz)
  • 2x 5dBi Internal Antennas
  • 1x Gigabit LAN Port
  • PoE 802.3at Complaint(12V/1.25A DC Supported)
  • NMS, Tx Power Controller, MSSID, 802.1x/WEP/WPA/WPA2, WMM, RSSI Indicator, SNMP, Private MIB, VPN Passthrough Supported
  • AP/WDS/Repeater Modes
  • EAP600

Dual-Band, High-Speed Performance for Today’s Demanding Applications

With Dual-Band, 11n concurrent speeds to 300 Mbps on each band, the EAP600 is a network workhorse. This top selling AP simultaneously supports both 2.4 and 5 GHz bands for peak 11n speed and performance, improving video streaming and large file transfer rates. Utilizing Band Steering, the EAP600 automatically detects and shifts Dual-Band-capable clients to the less congested 5 GHz band, greatly optimizing overall network bandwidth.

Low Profile, Attractive Smoke Detector-Style Blends with Modern Décor

With its award-winning, low profile design, the EAP600 blends nicely with other common building appliances and interior décor, making it more resistant to tampering and ideal for placement in style-conscious spaces where discrete ceiling placement is desired. Install the AP quickly and easily with its flexible mounting kit that includes ceiling and T-rail mounting brackets and a screw kit.

Improve Indoor Wireless Coverage Range & Multi-Floor Penetration

Achieve greater indoor coverage range and device connectivity with powerful, 29dBm transmit power and high-receive sensitivity. The EAP600 offers more than 2Xs greater wireless coverage over mainstream competitors by combining an integrated, 3D sectorized, 5dBi, Omni-directional antenna array to minimize interference and penetrate floors, ceilings, and walls, ensuring extended, reliable connections.

802.3af-Compliant PoE Port Expands Deployment & Power Options

Deploy and power the EAP600 anywhere it is needed, regardless of its proximity to power outlets. With 802.3af PoE support, the AP is easily powered up to 328 feet from an 802.3af-capable PoE Switch or injector for installation where power outlets are not readily available such as on ceilings or in hallways, and in building rafters or attics.

Quickly View, Monitor & Reconfigure Access Points Locally or Remotely

Remotely manage APs using SNMP tools or monitor them via EnGenius’ EZ Controller software. APs deployed in rafters and attics or other difficult to access areas are easily reconfigured, upgraded, and monitored remotely via EZ Controller. Map-View allows installers to upload and view a facility floor plan and identify and monitor all APs on the property. EZ Controller is available for Windows, Mac OS X and Linux systems.

With Dual-Band, 11n concurrent speeds to 300 Mbps over each band, the EAP600 is a network workhorse that utilizes Band Steering to automatically detect and shift Dual-Band-capable clients to the less-congested 5 GHz band, optimizing network bandwidth. It is designed to operate in a variety of indoor settings and supports today’s demanding applications.

With an award winning, low profile design, the AP blends nicely with interior décor making it perfect for style-conscious settings like homes, studios, and high-end offices. Deploy and power the AP nearly anywhere with 802.3at PoE support, and easily power it from an 802.3at-capable switch or injector. Configure the device as an Access Point or WDS (AP & Bridge) for customized deployment scenarios.

The AP features high RF transmit power of 29 dBm and high receive sensitivity on both bands for improved indoor wireless coverage range and multi-floor penetration. Its wide extending, integrated 3D sectorized, 5dBi, Omni-directional antenna array minimizes interference ensuring extensive, reliable connections.

Dual-Band 11n Speeds

AP supports high data speeds reaching 300 Mbps on both bands for expanded user capacities in indoor environments.

Stylish, Ceiling-Mount Design

Low profile design blends with standard building appliances and interior décor; includes a mounting kit with ceiling and T-rail mounting brackets and screws.

Internal High-Gain Antennas

Integrated, 3D sectorized, 5dBi, Omni-directional antennas provide greater Wi-Fi coverage and connectivity through floors, ceilings, and walls.

Single, PoE-Compliant Gigabit Port

High wire speed connections support 802.3af-compliant PoE for powering the AP regardless of its proximity to power outlets.

Versatile Operation Modes

Choose between two (2) operation modes, Access Point or WDS (AP & Bridge), depending on your application needs

EAP600
/ /
EnGenius
/
Hardware RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 8MB
Power: Consumption: Up to 16W
Antenna Four (4) Internal 5 dBi Omni-Directional Antennas
Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
1 x Reset Button
Power Jack
Power Requirements Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations  OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Receiver Sensitivity 802.11n (5 GHz)
-94dBm @ MCS0
-76dBm @ MCS7
-91dBm @ MCS8
-73dBm @ MCS15
802.11n (2.4 GHz)
-95dBm @ MCS0
-77dBm @ MCS7
-91dBm @ MCS8
-75dBm @ MCS15
802.11a (5 GHz)
-95dBm @ 6Mbps
-80dBm @ 54Mbps
802.11b (2.4 GHz)
-95dBm @ 1Mbps
-91dBm @ 11Mbps
Available Transmit Power (Max. Power may be different depending on local regulations)
802.11n (5 GHz)
27dBm @ MCS0~2/MCS8~10
26dBm @ MCS3/MCS11
25dBm @ MCS4/MCS12
23dBm @ MCS5/MCS13
22dBm @ MCS6/MCS14
21dBm @ MCS7/MCS15
802.11n (2.4 GHz)
27dBm @ MCS0~2/MCS8~10
27dBm @ MCS3/MCS11
26dBm @ MCS4/MCS12
25dBm @ MCS5/MCS13
24dBm @ MCS6/MCS14
23dBm @ MCS7/MCS15
802.11a (5 GHz)
26dBm @ 6~24Mbps
25dBm @ 36Mbps
23dBm @ 48Mbps
21dBm @ 54Mbps
802.11b (2.4 GHz)
7dBm @ 1~11Mbps
Software
Topology Infrastructure/Ad-Hoc
Operation Modes Access Point, WDS Bridge, WDS Access Point, Universal Repeater
Multiple BSSID Supports up to 8 BSSIDs per radio
LAN IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging
Spanning Tree Supports 802.1d Spanning Tree Protocol
Wireless Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only
QoS WMM (Wireless Multimedia)
VPN Pass-through (PPTP, L2TP, IPSec)
WPS Software only
Management
Tx Power Control Adjust transmit power by dBm
Configuration Web-based configuration (http)/Telnet
Telnet Server CLI
Firmware Upgrade Via web browser, settings are reserved after upgrade
Administrator Setting Administrator Username and Password Change
Reset Setting Reboot (press 1 second).
Reset to factory default (press 10 seconds)
System Monitoring Status Statistic and Event Log
SNMP V1, V2c, V3
MIB  MIB I, MIB II (RFC1213) and private MIB
Traffic Shaping Incoming and outgoing wireless traffic shaping
Auto-channel Selection Automatically selecting least congested channel
Bandwidth Measurement IP range and bandwidth management
Auto Reboot Reboot Access Point by minute, hour, day, or week
Backup and Restore Save and restore settings through Web interface
CLI Supports Command Line Interface
Diagnosis IP pinging statistics
Log SysLog and Local Log support
LED Control On/Off
AP Detection Scanning for available EnGenius APs
Wireless / Network PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
Wireless Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 field
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics
QoS (Quality of Service) WMM (Wireless Multimedia)
Environmental & Physical
Temperature Range Operating: 0ºC to 50ºC (32ºF to 122ºF)
Storage: -20ºC to 60ºC (-4Fº to 140ºF)
Humidity (non-condensing) Operating: 90% or less
Storage: 90% or less
Certifications  FCC, IC
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2014 EnGenius Technologies, Inc. All rights reserved.
Dimensions & Weights
EAP600 Device Weight: 0.62 lbs.
Diameter: 6.36”
Height: 1.64”
Package Contents EAP600 Dual Band N600 Indoor Access Point
12V/2A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual
EAP600
/ /
EnGenius
/
Top