Hanlong Adjusting Cable Slitter HT-325B
Turn the adjusting nut A to get the correct exposed length of blade for the cable and blade height.
Turn adjusting screw B to get the approximate cable diameter (not critical).This diameter is indicated on cable diameter guideC
Open the tool by pushing D upwards, and insert the cable between the blade and the V-shaped holder E and release.
Rotate the tool 2-3times in a clockwise direction, to cut round the cable.
Swivel the blade by pushing the shaft, and pull the stripper along the cable, to make a longitudinal cut.
Use the sharp edge of the insulation lever F to lever insulation from conductor if necessary.
HT- | Blade holder | Strip dimension |
325B | Metal | Strip cables from 6-25mm (.24"-1.0") diameter |